Meaning
Measurement procedures for wireless performance take place inside a shielded environment that simulates free-space conditions. This over the air chamber testing captures the interaction between the radio, the antenna, the enclosure and the battery of a finished product. It provides a more accurate assessment than conducted testing which uses cables.
Test Environment
Anechoic chambers lined with radio-frequency absorbing material prevent reflections and external interference from affecting the results.
System Integration
The influence of internal components such as batteries and displays on the antenna efficiency is revealed during the procedure. This over the air chamber testing identifies detuning caused by the proximity of the printed circuit board to the housing. Design adjustments are often made based on the gain and efficiency data collected in the chamber.
Engineers use these results to determine if the antenna placement needs to be optimized for better signal reception.
Certification Requirement
Regulatory bodies and network operators require these measurements to ensure the device will not degrade the performance of the wireless network. This over the air chamber testing confirms that the product meets the minimum standards for signal reception and transmission. Final approval for commercial release depends on the successful completion of these calibrated tests.
A product that fails these tests often requires a total redesign of the antenna matching network.