Meaning
Absorption of electromagnetic waves within the plastic casing of a component results in a measurable reduction of signal energy. This overmolded dielectric loss is an essential consideration for high frequency antennas where the encapsulation material can degrade the radiation pattern. The phenomenon is defined as the ratio of energy dissipated to energy stored during transmission.
Material Permittivity
Ratio of the electrical flux density to the electric field strength defines the basic behavior of the resin. Choosing a low loss tangent material minimizes the heating effects during high speed data transmission. This material permittivity changes with frequency and must be characterized across the whole operating band.
Geometry Influence
Thickness and shape of the plastic layer alter the path of the radio waves. A thicker coating might provide better mechanical protection but it also increases the chance of signal attenuation. Designers use electromagnetic simulation software to predict how the overmolded dielectric loss will affect the final gain of the system.
This geometry influence is calculated for every orientation of the device to ensure uniform coverage.
Frequency Response
Sensitivity of the material to different wavelengths dictates the bandwidth of the device. Higher frequencies usually experience higher absorption rates. The frequency response determines the maximum data rate for the integrated module.