Meaning
Surface mount technology lines measure efficiency by the speed of placing components onto printed circuit boards. This performance metric represents the pick and place throughput, which is measured in components per hour. The boundary of this metric excludes board load time and board unload time.
Real production rates are often lower than theoretical manufacturer rates due to necessary nozzle changes and feeder arrangements.
Machine Design
High-speed gantry systems and rotary heads are configured to minimize the distance between feeders and boards. Optimizing the pick and place throughput requires specialized software that plans the travel path of the placement head. Slow transitions reduce overall speed.
Efficient vacuum systems prevent part drops.
Board Complexity
Component diversity impacts the travel speed of the placement head. Achieving high pick and place throughput is difficult when a board uses many different sizes of resistors and large integrated circuits. Specialized nozzles must be swapped during the run.
This increases non-productive downtime.
Production Yield
Accuracy must not be sacrificed to achieve high speed. If the pick and place throughput is forced too high, alignment errors and tombstoning defects will increase. Machine operators run calibration tests to find the optimal speed that preserves solder joint quality.
Quality checks must keep pace with assembly speed.