Meaning
Evaluation method used to determine the total electromagnetic exposure from multiple radio sources operating at the same time. The process of power density summation combines the individual contributions of different frequency bands to ensure the total energy remains below regulatory safety limits. This technique is mandatory for devices that house both cellular and wireless local area network antennas.
Assessment Sequence
Technical review begins with the measurement of individual transmitters at their maximum rated output power. The assessment sequence of power density summation involves identifying the peak exposure locations for each antenna and determining if those peaks overlap. Formulas define how to add these values based on whether the signals are coherent or incoherent.
Certification Compliance
Regulatory filings require a detailed report showing that the cumulative energy does not exceed the allowed threshold for human exposure. The certification compliance of power density summation is verified by third party laboratories before a mobile device enters the market. Documentation must include the worst case scenarios for simultaneous transmission modes.
Safety Margin
Buffer zones account for measurement uncertainty and hardware variations between different production lots. The safety margin of power density summation protects the manufacturer from legal liabilities if a device operates at the extreme edge of the permitted range due to component drift or extreme environmental conditions. Designers use these calculations to decide the placement of antennas within a chassis to minimize energy concentration.
Shielding materials or power back off algorithms are implemented when the initial summation exceeds the target limit.