Meaning
Multi-rail integrated circuits suffer destructive high-current short circuits when input signals or peripheral power rails energize before core supply rails achieve stable voltage. A power sequencing latch-up occurs when parasitic silicon controlled rectifier structures trigger due to improper voltage ramp timing across board-level power domains. It governs the required turn-on order and slew rate constraints of low-dropout regulators and power management ICs.
The phenomenon stops being a risk once all power rails reach their steady-state operational voltages and internal power-on reset signals release.
Substrate Conduction
Internal parasitic PNPN structures turn on when substrate diodes become forward biased during improper power application. Experiencing power sequencing latch-up draws excessive supply current, heating die junction temperatures beyond physical damage limits. Sustained latch-up conditions burn internal metal traces and destroy system-on-chip silicon.
Rail Timing
Microcontroller supply rails require strict turn-on delays where core voltage must stabilize before input-output pad voltages rise. Hardware designs susceptible to power sequencing latch-up employ dedicated power sequencer ICs to control low-dropout regulator enable pins in mandatory chronological order. Discharge resistors on power rails clear residual voltages during fast power cycles to prevent accidental reverse biasing.
Disregarding power supply ramp rates leads to unpredictable system locks during cold temperature startups.
Hardware Mitigation
External Schottky clamping diodes divert excess substrate current away from sensitive chip input pins. Preventing power sequencing latch-up guarantees long-term hardware reliability in un-monitored IoT edge deployments. System power architectures must withstand rapid supply toggling without entering low-impedance fault states.