Meaning
Temporal parameters govern the duration a wireless module stays in a deep sleep state where it is unreachable by the network. The psm timer consists of two distinct values that define the active time and the periodic update period. These values are negotiated between the device and the core network during the attach procedure.
The configuration allows a sensor to stay in a dormant state for years while remaining registered on the network without requiring a full reattachment procedure.
Sleep Duration
Network availability stops entirely once the active timer expires and the device enters power saving mode. The psm timer dictates how long the modem can remain dormant before it must wake up to perform a routing area update. During this time, the device is essentially offline to the outside world.
This state consumes only a few microamps of current.
Reachability Window
Mobile terminated traffic is only possible during the brief window after the device sends an uplink message. If the psm timer is set to a very long value, the device might only be reachable once a day. This constraint requires the application server to be aware of the sleep schedule.
Commands are queued in the core network until the hardware wakes up.
Energy Conservation
System longevity depends on the careful adjustment of these timing intervals. A long psm timer reduces the overhead of signaling and saves battery capacity. This setting is ideal for water meters or agricultural sensors that report data on a fixed schedule.
The trade off is the inability to perform immediate remote configuration.