Meaning
Regulatory thresholds used in electromagnetic compatibility testing restrict the weighted amplitude of radiated or conducted emissions based on their repetition rate. This benchmark, known as the quasi-peak limit, is designed to reflect the subjective annoyance caused by interference to radio reception. It is lower than the peak limit but higher than the average limit for pulsed signals.
Equipment must remain below this threshold to secure market access.
Detector Function
A quasi-peak detector uses charge and discharge time constants to weight the measured signal amplitude. This weighting means that a high-repetition-rate pulse will produce a higher detector output than a single isolated pulse of the same amplitude. The charge time constant is typically shorter than the discharge time constant, allowing the detector to respond quickly to transients while slowly decaying.
This behavior mimics the response of legacy analog radio receivers to electromagnetic noise.
Compliance Assessment
Emissions testing is performed across a specified frequency range to ensure that all measured emissions are below the quasi-peak limit. This testing is often time-consuming due to the slow sweep rates required by the detector’s time constants.
Design Strategy
Circuit designers incorporate filtering and shielding to reduce the amplitude of both continuous and pulsed noise sources. These measures ensure that the product can pass the certification tests without requiring expensive late-stage design modifications. The effectiveness of the filters is verified using pre-compliance measurement setups before final testing.