Meaning
Unintended electromagnetic energy propagated through space from an electronic device or system during normal operation must be managed to prevent interference with other equipment. Every radiated emission is measured using specialized antennas to ensure it does not exceed the limits defined by international standards. This measurement verifies that the enclosure design and cabling do not act as effective transmitting elements.
Its application is universal across all electrical and electronic assemblies sold in commercial markets.
Measurement Setup
Positioning the product on a rotating table inside an anechoic chamber allows the sensor to capture signals from all directions. The radiated emission is evaluated at multiple heights of the antenna mast to find the maximum field strength. This standardized layout ensures the repeatability of the test results.
Shielding Design
Conductive enclosures block these escaping fields by providing a low-impedance path to the system ground. When a radiated emission is detected above the limit, adding shielding gaskets to the enclosure joints is a common remedy. This preserves the integrity of the metallic barrier.
Cable Filtering
Attaching ferrite cores to power cords prevents high-frequency common-mode currents from using the cables as antennas. This radiated emission is often caused by noise coupled from the internal board onto external harnesses. Filtering these lines directly reduces the total power sent into the environment.