Meaning
Electromagnetic energy that propagates through space from an electronic source can disrupt the normal operation of nearby receiver circuits. This unwanted electromagnetic emission is known as radiated interference, and it can originate from high-speed digital buses, switching regulators, or poorly shielded connectors. The occurrence of radiated interference can severely degrade wireless communication performance by raising the noise floor of integrated radio modules.
Minimizing this effect is a primary goal during the printed circuit board layout phase.
Coupling Path
The transfer of unwanted energy occurs when the source circuit acts as an unintended transmitting antenna. This radiated interference propagates through the air and is picked up by sensitive antennas or high-impedance signal traces on the victim board. Maintaining physical distance and implementing ground isolation help disrupt this coupling path.
Mitigation Strategy
Shielding is the primary method used to block the propagation of these unwanted emissions. Applying metal cans over noisy processors or clock generators confines the radiated interference to a small area. Trace routing on inner layers of a multilayer board also helps contain the fields.
Compliance Verification
Testing in an anechoic chamber is used to verify that a device compiles with regulatory limits on emissions. During this testing, the levels of radiated interference are measured across a wide frequency range to ensure they do not exceed allowable thresholds. Passing these tests is mandatory for commercial product release in most countries.