Meaning
Precision plastic covers used to protect millimeter-wave radar sensors must maintain an extremely flat and stable profile to prevent signal distortion. The mechanical distortion known as radome warpage occurs when non-uniform shrinkage or thermal stress deforms the molded cover during or after production. This deformation alters the critical distance between the antenna array and the cover material.
Physical Deformation
Molding high-temperature thermoplastics can introduce internal stresses due to uneven cooling rates across varying wall thicknesses. When radome warpage occurs, it is usually a result of poor tool design or incorrect processing parameters during injection molding. Measuring and controlling the cooling rate in the mold minimizes this mechanical distortion.
Electrical Consequence
An uneven cover plate alters the phase of the electromagnetic waves as they pass through the different regions of the plastic. Because the radar sensor relies on a uniform phase distribution across the antenna array, radome warpage can degrade the angular accuracy of the sensor. The varying distance between the antenna and the warped radome causes internal reflections that increase signal attenuation.
This mismatch can also lead to false target detections by raising the noise floor. Maintaining a flat surface is therefore essential for high-resolution target tracking in driver assistance systems.
Prevention Method
Engineers address this structural issue by optimizing the mold gating and using filler materials with low shrinkage rates. Post-mold fixtures can also hold the parts in place during the cooling phase to prevent distortion. These measures ensure that the finished housings comply with the tight mechanical tolerances required for reliable sensor performance.