Meaning
Linear distance intervals between measurement points govern the spatial resolution of an automated robotic probe. The parameter known as raster step size defines the distance the scanner travels along the X and Y axes between successive acquisitions. Choosing a smaller increment provides higher-resolution maps of surface emissions.
This value is critical when debugging dense boards with fine-pitch integrated circuits. The minimum size is constrained by the mechanical limits of the positioner.
Measurement Speed
Total test duration increases quadratically when the travel increments are reduced. Setting a very small raster step size requires the probe to stop and measure thousands of times over a small area. This increases the load on the test equipment and can wear out the mechanical drive.
Designers must calculate the minimum required resolution before starting the scan.
Probe Geometry
Physical dimensions of the scan tip dictate the useful limits of the spatial increment. If the raster step size is much smaller than the diameter of the loop probe, the overlapping measurements provide little new information. This condition causes oversampling without resolving finer trace details.
Technicians must match the step size to the probe’s aperture.
Software Modeling
Analysis applications interpolate the collected grid points to display smooth gradient maps. These visualizations allow developers to pinpoint the exact noise source on the PCB.