Meaning
Geometric arrangement of radio frequency traces and components on a printed circuit board governs signal integrity and prevents interference. The RF board layout is the positioning of the transceiver, filters, and transmission lines to maintain signal paths. This work directly influences wireless performance.
Impedance Matching
Signal transmission lines must maintain a constant characteristic impedance, usually fifty ohms, to prevent power reflections and signal loss. The trace width, copper thickness, and dielectric thickness of the board substrate are calculated to achieve this impedance. Ground pours are placed parallel to these traces to provide a return path for the signal and minimize radiation.
Developers use coplanar waveguide or microstrip configurations depending on the design requirements.
Shielding Method
Isolation of sensitive circuit blocks is achieved through physical separation and the use of metal shielding cans. Power amplifiers and transceivers are placed in separate areas of the board to prevent high-power signals from leaking into the receiver stage. Vias are placed around the edges of the shielding cans to create a continuous ground wall that blocks electromagnetic interference.
This separation is required to prevent desensitization of the receiver.
Verification Testing
Prototype validation involves measuring the return loss and insertion loss of the printed traces before final assembly. Vector network analyzers are used to test the impedance of the board traces and verify that they match the design specifications. If the traces do not match, the board layout must be adjusted to fix the trace geometry or the substrate material.
A correct layout ensures the final board passes both functional and regulatory tests.