Meaning
The reduction in signal power that occurs when a radio frequency signal passes through a test contact or coaxial connection interface measures the efficiency and quality of the high-frequency physical connection. Minimizing rf contactor insertion loss is essential in automated test setups to ensure that the signals transmitted from the tester arrive at the device under test with sufficient amplitude. This loss is caused by resistive dissipation within the pin material, impedance mismatches, and radiation losses at the connection boundary.
Material Integrity
High-quality contactors utilize beryllium copper or gold plating to maintain low contact resistance and minimize signal attenuation. The geometry of the contact pin is optimized to match the fifty-ohm system impedance, which prevents reflections that contribute to the rf contactor insertion loss. Regular maintenance and cleaning are required to prevent oxidation from increasing the signal loss.
Calibration Compensation
System software compensates for the known signal attenuation by boosting the output power of the tester. This calibration ensures that the correct signal level is delivered to the device terminal.
Measurement Error
Excessive signal loss can lead to false failures during parametric testing. Characterizing the connection ensures that the measured output power of the device is accurate.