Meaning
The alteration of the low-frequency amplitude variations of a modulated high-frequency carrier during amplification represents a primary cause of non-linear signal degradation. This RF envelope distortion compromises the integrity of complex modulation schemes in modern communication hardware. In wireless links, it decreases the signal-to-noise ratio at the receiver.
Underlying Cause
Memory effects in the power amplifier and dynamic supply fluctuations are the main sources of this amplitude alteration. Trap-induced transient shifts in the transistor parameters cause the gain to vary dynamically with the signal level. This amplitude-dependent gain variation prevents the amplifier from tracking the rapid changes of the signal envelope.
Receiver Impact
Degraded envelope fidelity increases the error vector magnitude of the transmitted signal. The receiving module suffers from elevated bit error rates, which reduces the effective data rate of the link. It also causes spectral regrowth, which interferes with adjacent communication bands.
Module Qualification
System integrators evaluate this distortion using vector signal analyzers during the design validation phase of the wireless module. The test protocol measures the distortion across different temperature ranges and power levels to ensure compliance with international standards. Acceptance requires that the distortion remains below the limit defined in the radio certification document.