Meaning
Signal denial technique involving the deliberate transmission of radio signals that disrupt communications by decreasing the signal to noise ratio. Deployment of rf jamming is often a security threat used to disable wireless alarms, cellular links, or satellite navigation receivers. The interfering signal can be a constant noise floor or a sophisticated pulse that mimics the target protocol.
Waveform Interference
Disruption of the receiver occurs when the energy of the jammer exceeds the sensitivity of the antenna. During an rf jamming event, the receiver front end becomes saturated, making it impossible to distinguish the valid data from the noise. Digital signal processors attempt to filter the interference, but extreme power levels will eventually block all communication.
Mitigation Strategy
Resilience against these attacks is built into the physical layer through frequency hopping or spread spectrum techniques. If a device detects rf jamming, it may switch to a different channel or increase its own transmit power to overcome the interference. Modern systems use directional antennas to null out the source of the noise.
Detection Capability
Monitoring of the ambient noise levels allows the system to distinguish between poor signal conditions and a deliberate attack. An rf jamming alert is generated when the receiver sees a sudden rise in broad band energy without a corresponding valid signal. This logic is a requirement for many industrial security certifications.