Meaning
Internal force acting parallel to the surface of a material plane creates a sliding tendency between adjacent layers. The shear stress is calculated by dividing the applied force by the area of the section resisting the slide. It is a fundamental factor in the failure of rivets, pins, welds and adhesive bonds.
This stress reaches its limit when the material undergoes plastic deformation or complete cleavage.
Fastener Loading
Transverse loads on a bolt put the shank into a state of pure shear. In a well-designed joint, the shear stress is resisted by the friction between the plates rather than the bolt itself. If the friction fails, the fastener becomes a pin that must withstand the entire cutting force.
Fastener sizing ensures the material remains below its shear yield strength.
Material Failure
Brittle materials fail suddenly when the internal limit is reached. Ductile metals show a visible elongation or twisting before the shear stress causes a rupture. This behavior is mapped on a stress-strain curve to determine the safety margins of the design.
Torsional Force
Rotating shafts experience this force as they transmit power from a motor to a load. Calculating the shear stress at the outer skin of the shaft determines the maximum torque it can handle. This value guides the choice of alloy for high-performance drive trains.