Meaning
The progressive increase in AC electrical resistance and signal attenuation along a conductor caused by current density concentrating near the outer surface at high frequencies. Antenna feedline designers analyze skin effect degradation when selecting conductor dimensions and plating materials for microwave frequencies. As operating frequencies increase into the gigahertz range, magnetic flux inside the conductor forces current flow into a shrinking skin depth layer.
The mechanism governs high-frequency alternating current conduction in metallic conductors, having no effect on direct current distribution.
Depth Redistribution
Penetration depth decreases inversely with the square root of signal frequency and material conductivity. High-frequency operational conditions induce skin effect degradation, restricting current flow to a thin outer layer of approximately zero point eight micrometers at six gigahertz. Inner regions of the wire or PCB trace carry negligible current density, drastically reducing effective cross-sectional conduction area.
This localized current concentration elevates conductor ohmic heating and increases signal insertion loss.
Surface Attenuation
Microscopic surface roughness forces high-frequency currents to follow extended paths along conductor contours. Combining surface micro-roughness with skin effect degradation causes rapid insertion loss escalation on unpolished microstrip traces above ten gigahertz. Electroplated nickel layers beneath gold flash finishes introduce high magnetic permeability, further reducing skin depth and increasing RF attenuation.
Conductor Selection
High-frequency interconnect designs utilize silver electroplating to reduce surface conductor resistance. Electromagnetic simulation models incorporate skin effect degradation parameters to predict signal loss in multi-gigabit transmission lines.