Meaning
A regulatory standard published by the Canadian government defines the supplementary procedure for assessing the compliance of wireless devices operating in the frequency range from three kilohertz to ten megahertz with human exposure limits. This guideline applies to devices that utilize wireless power transfer, inductive charging, or low-frequency communication. Following the rules of SPR 004 is necessary to ensure that both specific absorption rate and localized nerve stimulation limits are met before a device can be certified for the Canadian market.
Compliance Testing
The measurement of low-frequency magnetic and electric fields requires specialized probes and testing procedures due to the nature of near-field interactions. Test laboratories utilize the methodologies outlined in SPR 004 to evaluate devices that operate close to the human body, such as wearable sensors and charging pads. The evaluation must cover both nerve stimulation limits for the lower frequencies and thermal specific absorption rate limits for the higher frequencies.
This dual-assessment approach ensures comprehensive user safety across the entire low-frequency band.
Design Integration
The placement of inductive coils and low-frequency antennas must be managed to keep the generated field strengths below the specified thresholds. Engineers use the measurement requirements of SPR 004 to guide the shielding and component layout of the wireless power transfer module. Adding ferrite sheets or modifying the coil geometry helps localize the magnetic field, preventing unwanted exposure outside the device housing.
These design choices are validated during the prototype stage to avoid costly redesigns during final certification.
Certification File
The documentation of the measurement results and the calculated exposure levels is compiled into a formal report for regulatory submission. Achieving market approval requires that the technical file demonstrates adherence to the specific procedures set forth in SPR 004. This file is reviewed by the certification body during the handover process, confirming that the device is safe for public use.
Without this validated compliance report, the device cannot obtain the necessary equipment authorization for sale.