Meaning
Gradual reduction in the mechanical force exerted by a compressed metal contact occurs over time when the material is held under constant strain. This spring force relaxation is a major factor in the long-term reliability of board-to-board connectors and test socket probes. The loss of force happens because the metal undergoes microscopic plastic deformation under stress.
It defines the point where contact resistance begins to rise due to insufficient contact pressure.
Stress Redistribution
Internal stress in the metal grains rearranges itself as atoms migrate to lower-energy positions under compression. During spring force relaxation, the physical shape of the spring remains compressed, but it loses the ability to push back with its original energy. This change is most pronounced in alloys like brass and phosphor bronze.
Designers select beryllium copper to minimize this structural change.
Temperature Influence
High temperatures accelerate atomic movement, which speeds up the decline of contact pressure. In environments where spring force relaxation occurs, continuous exposure to operating heat can cause early connector failures. Selecting high-temperature materials prevents the contact force from dropping below the minimum threshold.
Connector Life
Connector lifespans are modeled by measuring force retention over thousands of simulated operating hours. Once spring force relaxation reduces the contact pressure, oxidation and dust can infiltrate the mating interface. This ingress leads to higher electrical resistance and eventual signal dropouts.
Using redundant contact points helps mitigate the consequences of force loss and maintains a stable connection across the lifetime of the product.