Meaning
Frequency translation in radio transceivers shifts low-frequency signals to high-frequency carriers using non-linear circuits. When dealing with sub-gigahertz mixing, the radio transceiver combines an intermediate frequency with a local oscillator to generate the transmission frequency. This process is necessary to achieve long-range communication.
Frequency Planning
Spurious frequency products are generated during the mixing process and must be managed to prevent out-of-band emissions. If the local oscillator frequency or intermediate frequency is chosen poorly, the resulting harmonics can fall directly into other wireless bands or violation bands. Engineers use frequency planning tools to select local oscillator values that place these unwanted mixing products far away from critical bands.
This planning ensures that the spurious products can be easily filtered out.
Filter Configuration
Bandpass filter design is necessary to select the desired mixing product and attenuate all other unwanted signals. Low-loss filters are placed immediately after the mixer to block the local oscillator leakage and any images generated during the mixing process. Multi-stage filters are used to provide high rejection of out-of-band spurious emissions while minimizing the insertion loss in the desired band.
This filtering is required to meet the stringent emission limits of regulatory bodies.
Hardware Integration
Board-level shielding must be implemented to prevent local oscillator leakage and mixing products from radiating directly from the board traces. Sensitive mixer circuits and their associated filters are placed inside shielding cans to isolate them from other circuits. Proper ground routing and the use of decoupled power supplies prevent these high-frequency signals from coupling into other system rails.
This isolation is required to maintain the sensitivity of the receiver and prevent interference with other onboard components.