Meaning
Surface wear occurs when microscopic points on two moving parts cold-weld together and then tear apart during motion. In high-pressure environments, sub-insert galling leads to the buildup of debris that eventually jams the mechanism. This is a common issue in precision tools where small pins or slides must move with very tight clearances.
Friction Mechanism
The heat generated by sliding surfaces can cause the protective oxide layer of the metal to break down. Once the bare metal is exposed, sub-insert galling starts to pull material from one surface and deposit it on the other. This creates a rough patch that increases the force required to move the part.
Eventually the two surfaces lock together so tightly that they cannot be separated without destroying the assembly.
Material Selection
Engineers prevent sub-insert galling by choosing metals with different hardness levels. A bronze bushing against a steel pin is a standard way to avoid this type of seizure.
Preventive Coating
Applying a thin layer of dry lubricant or a hard chrome plating reduces the direct contact between the metal faces. If sub-insert galling is detected during an inspection, the damaged parts must be replaced or refinished to restore the smooth movement. Regular maintenance ensures that the tool lasts for its full rated life.