Meaning
A mechanical interface couples ultra-high-frequency coaxial lines or waveguides with electronic assemblies. In high-frequency board design, sub-THz connectors provide the physical link that transfers signals above one hundred gigahertz between modules or test instruments with minimal return loss. These components are manufactured with microscopic tolerances to avoid impedance changes at the connection point.
They ensure that high-speed signals pass through the interface without significant attenuation.
Mechanical Tolerance
At frequencies exceeding one hundred gigahertz, even minor physical misalignments can disrupt signal transmission. The design of sub-THz connectors relies on precise thread and pin geometries to keep the mating surfaces perfectly centered. Dust or surface scratches on the mating face will degrade the electrical contact.
Technicians use specialized torque wrenches to avoid over-tightening during assembly.
Impedance Matching
Signal reflection occurs when the diameter of the conductor changes abruptly. To maintain continuous signal flow, sub-THz connectors must have their internal dimensions matched to the dielectric properties of the cable and substrate. This design prevents the formation of standing waves that would attenuate the transmitted power.
Precision simulation is used to optimize the transition from the connector to the printed circuit board.
Testing Requirement
Verification of connector quality involves measuring S-parameters up to the operational limit. Test labs use vector network analyzers to verify that the sub-THz connectors meet the return loss specification. This testing confirms that the interconnect will perform correctly in a production system.