Meaning
Periodic unwanted variation in the DC output voltage of a power source. This supply line ripple is generated by the switching action of power converters or the charging and discharging of filter capacitors. It must be kept below specified limits to prevent malfunction or degraded performance in sensitive electronic circuits.
Noise Injection
High-frequency voltage variations can propagate through the power rails and affect sensitive analog or radio frequency components. This noise injection of supply line ripple degrades the signal-to-noise ratio of low-noise amplifiers and increases the phase noise of local oscillators. If the ripple is too high, it can lead to communication errors and reduced range in wireless transceivers.
To mitigate this effect, engineers use low-dropout regulators and bypass capacitors close to the active components.
Capacitor Degradation
Long-term degradation of filtering components can increase the voltage fluctuations on the power lines over time. This capacitor degradation of supply line ripple occurs as electrolytic capacitors dry out or lose capacitance due to high operating temperatures. When the capacitance drops, the filter loses its effectiveness and the ripple amplitude increases significantly.
Regular monitoring of the output ripple helps detect failing capacitors before they cause complete system failure.
Measurement Technique
Accurately evaluating the magnitude of voltage fluctuations requires specialized oscilloscope probes and proper grounding methods. This measurement technique of supply line ripple typically involves a coaxial connection with a blocking capacitor to isolate the AC component. Standard long ground leads should be avoided as they can act like antennas and pick up ambient noise, which corrupts the measurement.
Utilizing a short ground spring ensures that only the actual voltage variation on the rail is measured.