Meaning
Timing signals in a two wire interface provide the synchronization necessary for reading and writing to the internal memory of a processor. The swd clock regulates the speed at which data bits are moved between a debugger and a target microcontroller. This signal is generated by the host tool to ensure the target responds at a predictable rate.
Stable clocking is required for reliable access to registers and system memory during the debugging process.
Debug Frequency
Operational limits for the interface are defined by the maximum speed the target silicon can support. A swd clock that runs too fast will cause communication errors as the internal logic cannot keep pace with the incoming bits.
Signal Integrity
Bi-directional data transfer occurs on a separate line that is synchronized by the timing pulses. The swd clock remains active during memory inspections and firmware uploads to maintain the link between the development computer and the chip. Physical cable length and electromagnetic interference can limit the usable frequency of this clock.
Power State
Consumption of energy increases when the interface is running at high speeds. Because the swd clock is only needed during development or factory programming, it is typically disabled in the final product to save power. Proper termination of the clock pins prevents signal noise when the debug interface is not in use.