Meaning
The voltage measured directly across the output contacts of a cell or battery under a specific electrical load. This value differs from the open circuit voltage due to internal losses within the cell during discharge. In the development of wireless communication modules, terminal potential determines the actual voltage delivered to the power management circuits during peak transmission loads.
Engineers monitor this value to ensure that the input voltage does not fall below the minimum operational limit.
Dynamic Response
When a high current pulse is applied, the output voltage drops rapidly and then stabilizes as chemical equilibrium is reached. This transient drop can trigger a system reset if the battery has high internal resistance. This response profile must be characterized over a range of temperatures.
Measurement Setup
Accurate recording of the output voltage requires connecting the voltmeter directly to the battery pins rather than further down the circuit board trace. This setup eliminates the voltage drop caused by the trace resistance from the measurement. This technique ensures the accuracy of the collected data.
Validation Procedure
Verifying the voltage level under load involves executing simulated operational cycles while recording the voltage at high sampling rates. This test is repeated at different states of charge to map the complete discharge curve. This validation confirms the battery can support the product throughout its life.