Meaning
Custom cabling and connector assembly used to interface a module under evaluation with monitoring equipment. A test board harness provides stable electrical connections that would be impossible with loose wires or probe tips. This assembly often includes SMA connectors for radio frequency signals and multipin headers for data.
Signal Path
Low loss cables ensure that the measurements taken at the analyzer represent the true output of the module. The test board harness must be designed with controlled impedance to avoid reflections that could distort the results. Careful routing of sensitive traces prevents crosstalk between the power lines and the high speed data lanes.
Mechanical Support
Rigid mounting prevents physical stress from damaging the tiny solder joints on the device under test. A test board harness often features a custom jig or socket that allows for quick swapping of modules during a production run. This repeatability is essential for gathering statistical data across large batches, as it removes the variability of hand soldered connections and ensures that every unit is positioned identically relative to the measurement probe.
Calibration Reference
Cable losses must be accounted for by the software before calculating final pass or fail results. By using a standard test board harness, the lab can subtract the known attenuation of the wires from the raw data. This process ensures that the reported power levels are accurate to within a fraction of a decibel.