Meaning
Structured sets of digital input patterns and expected outputs are used to stimulate a device under test and evaluate its logical correctness. Each test vector is applied to the input pins of the integrated circuit at specific clock edges to check if the resulting output pins match the pre-calculated golden values. This deterministic data set allows engineers to verify both basic logic functions and complex protocol states.
Vector Generation
Automated software tools analyze the digital schematic of the chip to construct patterns that maximize fault coverage. The vector generation focuses on reaching specific nodes within the circuit that are prone to manufacturing defects. Simulation environments run these patterns to confirm they do not cause internal bus contention.
Execution Speed
High-speed pattern memories on the test instrumentation load the digital sequences into the local buffer before starting the cycle. This execution speed allows the tests to run at the rated clock frequency of the chip.
Error Detection
Comparing the actual output pin voltages against the stored values reveals any hardware faults or timing violations. The error detection mechanism halts the test run immediately upon finding a mismatch to save testing time. Log files record the precise cycle number and failing pin to assist the engineering teams with failure analysis.