Meaning
Specific class of intermodulation distortion products that occur at frequencies calculated by the formula two f1 minus f2 or two f2 minus f1. Calculation of third-order pim is a critical step in frequency planning to avoid interference within the receiver passband.
Mathematical Basis
These products result from the cubic term in the mathematical description of a nonlinear system. Because third-order pim signals are often very close to the original carrier frequencies, they are difficult to filter out once generated. This proximity makes them more dangerous to signal integrity than higher order products.
Signal Degradation
The power level of these unwanted signals increases rapidly as the power of the fundamental carriers rises. In many communication systems, third-order pim is the dominant source of interference because it falls directly into the adjacent receive bands. Certification of connectors and cables involves verifying extremely low levels of this distortion.
Using high purity materials and maintaining high contact pressure at junctions are common strategies to mitigate the effect. A device that fails to control these products will suffer from a reduced uplink budget and poor spectral efficiency. Testing involves applying two high power tones and measuring the resulting noise in the designated receive channel.
Measurement Standard
Industry standard measurements are typically expressed in decibels relative to the carrier or in absolute power units like dBm. This metric allows for the comparison of component quality across different suppliers.