Meaning
Electric power circuits experience rapid, short-duration increases in voltage or current that exceed the normal operating limits. These disturbances, called transient spikes, are caused by switching events, lightning strikes or electrostatic discharges. They can damage sensitive semiconductor components and disrupt communication links if they are not mitigated.
The duration of these events is typically measured in microseconds, but the peak power can be substantial.
Voltage Peak
The amplitude of the disturbance can reach several times the rated supply voltage of the circuit. Such an occurrence of transient spikes forces integrated circuits into overvoltage breakdown, which can cause permanent latch-up or gate oxide failure. To prevent this, the circuit must include protection components that can clamp the voltage to a safe level.
Circuit Protection
Transient voltage suppressors or metal oxide varistors are placed in parallel with the lines to shunt the excess energy to ground. Such protective devices react in nanoseconds and switch from a high-impedance state to a low-impedance state during an overvoltage event. The high current is safely bypassed away from the sensitive load.
Inductive Load
Switching off an inductive load like a motor or a relay coil generates a large back-electromotive force. Such action results in a rapid voltage surge that must be clamped by a flyback diode.