Meaning
A temporary or permanent reduction in the signal strength or voltage level occurs during active wireless data transfer. In cellular systems, a transmission drop can cause connection instability or force the module to disconnect from the network. This event is typically triggered by high power consumption peaks during radio bursts.
Technical Cause
High internal resistance in the power source prevents the battery from delivering the necessary peak current during active transmission. The resulting transmission drop is caused by the sudden load pulling down the supply rail below the system threshold.
System Impact
Unexpected software resets or modems locking up can result from the supply voltage falling below the minimum operational limit. When a transmission drop occurs, the device often loses its registered network state and must restart the power hungry handshake process. This failure loop drains the battery rapidly and disrupts the scheduled transmission of sensor data to the server.
It can also lead to data corruption if the system shuts down mid write.
Mitigation Method
Placing large reservoir capacitors close to the antenna module provides the necessary local energy buffer to handle the transmit pulse. This hardware solution minimizes the transmission drop by supplying the immediate current peak from the capacitors rather than the battery. Additionally, firmware can be optimized to stagger non critical tasks so they do not coincide with radio activity.
These steps guarantee that the communication module receives a stable voltage during its active windows.