Meaning
Sudden increases in electrical current consumption occur when a wireless module activates its power amplifier to send data over the air. Transmit current bursts are characterized by their rapid rise time and high peak values compared to the idle current of the device. These events can draw hundreds of milliamperes for durations ranging from a few microseconds to several milliseconds.
Managing these peaks is a primary concern for the design of small, battery-powered electronics.
Waveform Profile
The shape of the current draw depends on the modulation scheme and the protocol used for communication. For example, a global system for mobile communications burst has a very specific timing and amplitude profile that repeats at regular intervals. In contrast, modern low-power wide-area networks might have longer, lower-amplitude bursts.
Analyzing these profiles allows engineers to size the power supply and battery correctly for the expected load.
Power Integrity
Maintaining a stable voltage during a high-current event requires low-impedance paths between the power source and the load. If the resistance of the traces or the internal resistance of the battery is too high, the voltage will drop significantly during the burst.
Thermal Dissipation
Repeated high-current events generate heat within the power amplifier and the battery. While a single burst might not significantly raise the temperature, a high duty cycle of transmissions can lead to thermal stress. System designers must ensure that the enclosure can dissipate this heat to prevent damage to the components.