Meaning
Unused portions of plated through holes that extend beyond the active signal layer connection in a multi layer circuit board act as open-ended transmission lines. This excess metal column, known as a via barrel stub, acts as an electrical antenna that reflects signal energy back into the transmission path. It remains a major source of impedance discontinuities in high speed digital designs.
Parasitic Resonance
High frequency signals can experience severe attenuation at specific frequencies where the electrical length of the unused column equals one quarter of the signal wavelength. In the presence of a via barrel stub, the reflected wave interferes destructively with the incident wave, creating a deep resonance notch in the channel frequency response. This notch effectively blocks the transmission of signals at that frequency.
Backdrill Removal
Removing the excess metal involves mechanically drilling out the unused section of the plated through hole from the bottom or top of the board. This manufacturing step, called backdrilling, leaves only a tiny remnant of the via barrel stub, thereby restoring the continuity of the transmission channel.
Signal Degradation
Leaving stubs intact degrades the rise times of high speed digital pulses and limits overall data transfer rates.