Meaning
An optical metrology technique utilizes broadband light sources to measure surface topography and thin film thickness with sub-nanometer resolution. Implementing white light interferometry allows for the non-contact characterization of sensitive materials and precision-machined surfaces. The system works by splitting a light beam and reflecting one part off a reference mirror and the other off the sample.
When the paths are nearly equal, interference fringes appear, providing a height map of the surface. This technique allows for the rapid assessment of large areas with high precision.
Vertical Resolution
Sensitivity in the z-axis is independent of the magnification of the objective lens. White light interferometry achieves higher precision than traditional laser interferometry by eliminating phase ambiguity.
Analysis Software
Processing the fringe patterns requires specialized algorithms to reconstruct the three-dimensional surface profile. White light interferometry data is transformed into parameters like average roughness and peak-to-valley height. The software can filter out noise and compensate for tilt in the sample placement.
Sample Preparation
Non-destructive testing is possible because the technique does not require a vacuum or conductive coating, allowing for the inspection of delicate components in their natural state. White light interferometry works on a variety of materials including glass or polymers. The sample must only be reflective enough to return a portion of the incident light to the detector.
This flexibility makes it suitable for inspecting finished assemblies during the production process.