Meaning
Electrical characterisation relies on specific configurations to isolate different signal components. During ac-coupled testing, series capacitors block direct current while allowing high-frequency alternating current signals to pass between transmitter and receiver. This setup stops at the terminal boundary of the decoupling capacitor, which prevents direct-current bias from affecting the tester channel.
Signal Isolation
Blocking constant voltage offsets is necessary to protect sensitive receiver ports from high common-mode voltages. High-speed serial interfaces use ac-coupled testing to verify transmitter performance without risking damage from dc mismatches. This approach allows the evaluation of transitions without interference from static voltage levels.
Capacitor Selection
Passive components in the signal path introduce parasitic effects that can distort high-frequency test patterns. Engineers executing ac-coupled testing must choose decoupling values that balance low-frequency cutoff points against the physical package size. Smaller capacitor bodies minimize inductive discontinuities at gigabit data rates.
Fidelity Verification
Signal distortion from long sequences of identical bits remains a primary challenge in high-speed digital validation. The phenomenon known as baseline wander arises during ac-coupled testing when prolonged high or low states charge the coupling series capacitance. This shift alters the decision threshold at the receiver, making pattern choice a critical parameter of the test plan.
Engineers employ specific scrambling codes and dc-balanced encoding schemes to counter this drift during silicon qualification and prevent false failures.