Meaning
Compliance evaluation methodologies for wireless equipment operating in shared frequency bands verify that a transmitter dynamically shares spectrum with other users. An adaptivity test procedure assesses this capability by simulating interference and measuring the response time of the transceiver under test. This measurement ensures that coexisting systems do not suffer from excessive packet loss, and it establishes a baseline for channel sharing behavior.
Execution Protocol
Test engineers subject the hardware to a controlled interference signal to trigger its avoidance mechanism. The adaptivity test procedure requires the device to cease transmission within a specified channel occupancy time.
Channel Evaluation
Clear channel assessment mechanisms must operate continuously during the verification process to monitor the frequency band. If the adaptivity test procedure detects a failure to defer, the device violates regional standards and cannot be certified for public sale. Designers must configure the transceiver sensitivity to match the regulatory limit.
Verification Threshold
Regulatory limits determine the maximum power level of the noise source used to challenge the equipment. The adaptivity test procedure calculates this threshold based on the antenna gain and the maximum transmit power of the device. Devices with high antenna gain must trigger avoidance at lower noise levels to maintain fairness.