Meaning
Financial responsibility for components damaged during production defines the fiscal exposure for materials lost during the build process. Agreements regarding assembly scrap liability typically set a percentage threshold for unavoidable losses. This limit distinguishes between normal process waste and excess damage caused by equipment failure or technician error.
Loss Threshold
Contractual terms establish a specific percentage of the bill of materials value that the manufacturer absorbs as part of the service fee. Exceeding this assembly scrap liability level triggers a reconciliation where the supplier pays for the surplus components. Low complexity builds often permit a one percent loss while high value dense assemblies might require a tighter half percent limit.
The calculation of this figure includes the cost of the raw board and the individual components mounted to it.
Recovery Process
Identifying the root cause of a defect determines whether the loss falls under the standard allowance or requires a separate claim. Documentation includes a scrap report that lists part numbers and the specific station where the failure occurred. This record provides the basis for the final audit at the end of the production run.
Material Balance
Final reconciliation occurs after the shipping of the last unit in a batch. Calculations compare the quantity of parts issued from the warehouse against the quantity of working units delivered and the logged scrap. A positive balance indicates the process remained within the predicted yield.