Meaning
Unpopulated printed circuit board verification relies on extracted electrical connectivity files to validate conductive paths before component assembly. Generating a bare-board netlist from CAD layout data creates a master connectivity reference detailing all required electrical continuities and short-circuit isolations. Flying-probe and bed-of-nails testers load this file format to program test vectors across exposed copper pads.
Test equipment compares measured node-to-node resistance values directly against this structural specification to identify open circuits or unwanted copper bridges.
Extraction Standard
Computer-aided design export routines extract node names, x-y pin coordinates, and hole locations into standardized IPC-D-356 formats. The bare-board netlist establishes definitive connectivity expectations independent of photoplotter optical artwork. Automated conversion tools parse trace topology to assign every exposed pad to its corresponding signal net.
Testing algorithms use these absolute coordinate locations to position test probes rapidly during high-volume production inspection.
Fault Detection
Automated test fixtures apply programmed voltages across test points to detect structural fabrication defects. Utilizing a bare-board netlist enables automated equipment to detect micro-shorts and trace fractures prior to component population. Unintended copper slivers between dense surface-mount pads trigger isolation failures during automated continuity scans.
Verification Limit
Electrical test files confirm structural continuity between exposed pads without verifying passive component values or active semiconductor logic. Although a bare-board netlist guarantees physical copper routing matches schematic topology, functional testing requires assembled components and power application. The netlist verification process terminates once bare substrate continuity and isolation pass specified resistance thresholds.