Meaning
Slow variations in the ambient electrical charge reading of an untouched sensor array describe a fundamental environmental instability. Baseline capacitance drift occurs when temperature changes, humidity fluctuations or mechanical stress cause the quiescent capacitance value to wander over time. The parameter governs sensor recalibration routines and minimum trigger thresholds in proximity interfaces.
It stops applying once an actual proximity target enters the reactive field and forces a rapid step-change in capacitance.
Thermal Hysteresis
Environmental temperature shifts alter dielectric constants in housing resins and printed circuit board substrates. When ambient heat rises, baseline capacitance drift accelerates as moisture evaporates or material expansion changes trace geometry. Physical PCB expansions alter gap dimensions between ground planes and sensor pads.
These structural shifts cause a permanent offset if thermal cycling induces mechanical warping. Testing requires placing the assembled module in a thermal chamber across operating limits while logging quiescent raw counts.
Tracking Algorithm
Dynamic software filters update the nominal zero state during inactive operational windows. Algorithms monitor raw sensor values, updating the reference baseline when rate of change remains below a defined limit. If baseline capacitance drift occurs too rapidly, fixed tracking limits fail to keep pace, causing the controller to misinterpret environment shifts as human contact.
Fast slewing filters reduce false triggers but risk masking slow, intentional human approaches. Engineers set tracking speeds during module firmware verification.
Threshold Margin
False trigger events occur when environmental offsets exceed reserved guard bands before recalculation occurs. High drift rates diminish the effective signal-to-noise ratio, compromising touch detection boundaries during compliance testing.