Meaning
Graphical voltage profiles track cell terminal potential against accumulated depth of discharge under controlled current loads. A battery discharge curve defines the operational voltage range of an electrochemical cell from full state of charge down to terminal exhaustion. The curve identifies flat discharge plateaus, internal resistance voltage drops, and steep voltage roll-offs near depletion.
It governs usable energy calculations, runtime estimation algorithms, and safe battery management system cutoffs. The profile stops applying beyond maximum continuous discharge current ratings or outside qualified temperature limits.
Voltage Knee
Cell voltage drops rapidly once active material conversion nears completion at the end of a discharge cycle. The inflection point on a battery discharge curve marks the transition into severe polarization where terminal voltage collapses. Battery management algorithms trigger system shutdown before cell voltage drops below this critical inflection boundary.
Operating beyond this knee damages internal electrode structures and compromises cell capacity over subsequent recharge cycles.
Thermal Shift
Ambient temperature changes shift cell resistance profiles and modify terminal voltage output. Cold environments steepen the slope of a battery discharge curve by increasing electrolyte viscosity and reducing ion mobility. High temperatures elevate baseline discharge voltage slightly but accelerate chemical degradation within the enclosure.
Design engineers evaluate temperature family curves during battery pack qualification tests.
Thermal Limit
High discharge rates introduce internal resistive heating that alters terminal potential readings. Heavy current draw drops the battery discharge curve downward across all states of charge due to internal IR losses. System power budgets must account for reduced usable watt-hours when operating near maximum discharge current limits.