Meaning
The total opposition that a cylindrical lithium cell with a concentric electrode design presents to the flow of alternating current at a specific frequency. This physical property determines the voltage drop across the cell during high current pulses. In low power wireless transceivers, bobbin cell impedance represents a limiting factor during transmitter bursts, since a high impedance can cause the system voltage to drop below the reset threshold.
Designers must evaluate this value at the low temperature limit of the product.
Voltage Recovery
Transient current demands pull down the terminal voltage of the cell. If the internal resistance is too high, the voltage remains below the minimum operating threshold for the duration of the transmission. This recovery curve determines whether the device can complete its task before resetting.
Cell Selection
Selecting the proper battery requires matching the peak current profile of the system with the electrochemical properties of the energy source. Some chemistries offer higher capacity but exhibit higher internal resistance under load. This trade-off dictates the choice between spiral and bobbin constructions for specific sensor nodes.
Diagnostic Test
Measuring this value typically involves applying a one kilohertz sinusoidal current and recording the voltage response. This test is performed before and after thermal stress to assess the stability of the cell contacts. It provides a quick indicator of assembly quality.