Meaning
Edge-mounted semi-plated holes on a printed circuit board facilitate direct soldering of a sub-assembly to a host system board. These castellated module pads provide both a mechanical connection and electrical continuity without the use of pin headers. The geometry consists of plated vias cut in half during the panel routing process.
This structure is typically limited to low-power or low-signal interfaces where visual solder inspection is required.
Assembly Interface
Solder deposition during host board preparation requires precise stencil design to prevent bridging or starvation. Because castellated module pads align with corresponding landing patterns on the mother board, paste thickness determines the final coplanarity of the module. Capillary action draws the molten alloy up the plated semicircular walls during reflow.
This physical behavior creates a visible fillet that supports reliable inspection.
Mechanical Tolerance
Substrate routing tolerances must remain within strict limits to ensure even contact across all outer edge terminals. When castellated module pads are fabricated, the precision of the routed edge dictates the remaining plating depth. Any variation in board routing can split the plated barrel unevenly, which changes the contact area.
Handlers must ensure board edges do not suffer mechanical damage during panel singulation.
Thermal Transfer
Conductive heat pathways through edge contacts are limited by the small cross-sectional area of the copper lining. While castellated module pads can carry low currents, high-power paths require multiple parallel vias to prevent localized heating. Engineers must distribute ground contacts evenly along the edges to manage both heat and return currents.