Meaning
Plated half-holes located along the outer edges of a printed circuit board facilitate direct board-to-board soldering. These castellated pads allow a smaller breakout module to be mounted flat against the surface of a larger mother board. The process involves drilling standard plated holes through the board and then routing the board edge through the center of those holes, leaving a series of metalized semi-cylinders.
This design creates a reliable solder joint that can be visually inspected with ease.
Manufacturing Precision
Precision routing is necessary to ensure the remaining copper plating does not detach from the hole wall during the cutting step. If the router bit is worn, it can pull the copper cladding away from the laminate, causing burrs or complete pad lifting. Fab houses often use specialized tooling or chemical etching to yield clean castellated pads.
This step avoids short circuits during assembly.
Joint Formation
Solder fillet formation during assembly is the primary mechanism that ensures mechanical and electrical stability. When molten solder is applied, it wicks up the semi-cylinder of the castellated pads, creating a visible concave fillet. This physical shape makes it simple to confirm the quality of the connection.
Module Integration
Wireless modules and daughterboards often utilize this edge-connection method to avoid the height penalty of standard headers. Utilizing castellated pads keeps the profile of the integrated system extremely low, which is critical for smart devices and sensors. This mounting method also provides a direct thermal path to the ground plane of the motherboard, assisting in heat management.