Meaning
Attenuation levels between the input and output ports of a resonant structure define the ability of a system to reject unwanted signals while allowing the desired frequency to pass with minimal obstruction. Measurement of cavity filter isolation quantifies the depth of the stopband in decibels relative to the passband signal. High values are required to prevent high power transmitters from desensitizing nearby sensitive receivers.
Interference Mitigation
Co-located radios rely on sharp filtering to operate within a shared antenna system. Achieving sufficient cavity filter isolation prevents the mixing of signals that creates intermodulation products. Duplexers depend on this property to separate uplink and downlink frequencies in a single physical chassis.
Tuning Precision
Physical adjustment of the internal tuning screws changes the coupling between individual cavities. Technicians monitor the response on a vector network analyzer to find the optimal balance between insertion loss and rejection. Silver plating on the internal surfaces reduces skin effect losses and improves the quality factor of the resonators by providing a high conductivity path for rf currents.
Small changes in temperature can shift the resonance and degrade the performance.
System Performance
Total link budget calculations incorporate the losses and rejection figures provided by the filter stage. Environmental factors must not compromise the electrical separation.