Meaning
Receiver performance measurement in a hardwired RF path establishes the baseline capability of a radio module to demodulate weak signals in the absence of over-the-air attenuation or multi-path interference. Low-power wireless transceiver evaluations rely on conducted sensitivity to establish a reference point before antenna integration. The measurement requires a direct coaxial connection between the RF signal generator and the device antenna port.
Evaluation Standard
Wireless product specifications require a precise determination of the minimum power level at which a bit error rate or packet error rate target is achieved. Handover documents for module qualification define conducted sensitivity under controlled thermal conditions. A well-calibrated coaxial path isolates the receiver from environmental electromagnetic fields.
This measurement differs from radiated metrics by omitting antenna radiation patterns.
Interface Coupling
RF coaxial connection cables introduce attenuation that requires compensation during test sequences. When calibration offsets are inaccurate, conducted sensitivity figures deviate from actual transceiver limits. System integrators apply attenuation factors directly to the signal source to yield a true input power calculation.
This adjustment secures repeatable test results.
Hardware Boundary
Transceiver designs specify receiver performance limits that represent the maximum achievable performance under ideal electrical conditions. Shielding canopies on the module prevent stray electromagnetic radiation from bypassing the RF port during these tests. Once the transceiver is mounted on a multi-layer host board, digital noise coupled from nearby microcontrollers can degrade the actual performance.
This degradation occurs despite an excellent conducted sensitivity value measured at the module level. High-speed digital traces must run far from the RF input line to maintain this boundary.