Meaning
Transient interruption in electrical continuity occurring when a compressed terminal fails to maintain a gas-tight bond with the conductor. A crimp discontinuity usually indicates a failure in the mechanical deformation process that joins the wire to the contact. Proper calibration of tooling prevents these gaps by ensuring the cold-welding of the metal surfaces is complete.
This mechanical bond must withstand thermal expansion and contraction without losing electrical contact over the operational life of the device.
Detection Methodology
High-speed monitoring equipment records voltage drops at microsecond intervals during environmental stress screening. A crimp discontinuity is often too brief for a standard multimeter to capture. Systems must trigger alarms when the resistance exceeds a predetermined threshold.
The test duration typically spans several hours to capture events triggered by random vibration profiles. Vibration events correlate with intermittent system failures that are difficult to diagnose in the field.
Root Cause
Undersized wire gauges or incorrect terminal sizes lead to insufficient metal displacement within the crimp barrel. If the compression force is too low, the individual strands remain loose and move under external force. Contamination on the wire surface or oxidation also prevents a stable electrical path.
Excessive vibration worsens the gap as the surfaces rub against each other.
System Reliability
Intermittent signals caused by this failure lead to data loss or unintended resets in control electronics. Because a crimp discontinuity is non-permanent, the assembly may pass a simple continuity check after the stress is removed. Rigorous qualification includes pull-force tests and cross-sectional analysis to verify the integrity of the connection.
Secure terminations are necessary for mission-critical hardware.