Meaning
A temporary reduction in the maximum drain current of a field-effect transistor occurs after the application of a high-drain voltage. This current slump decreases the available output power of high-frequency power amplifiers. In wireless connectivity hardware, it reduces the effective transmission range during active data sessions.
The phenomenon arises from slow carrier trapping in the buffer or surface regions of the device.
Trap Activity
Electrons injected from the channel become lodged in empty energy states during the high-voltage off-state of the switching cycle. These trapped charges act as a negative gate bias that repels mobile carriers when the transistor is turned on. Because the emission process is slow, the channel remains partially restricted even after the stress is removed.
This temporary reduction in channel conductivity lowers the dynamic power capability.
RF Consequence
Transmitter output power drops and distortion increases as a direct result of this reduced current capacity. In cellular modules, the power amplifier fails to deliver the rated peak power, which degrades the modulation quality. The error vector magnitude of the transmitted signal increases, leading to higher packet retransmission rates.
Mitigation Standard
Component qualification relies on pulsed measurements to verify that the reduction remains within acceptable margins. The component supplier must supply a data sheet showing minimal deviation between static and dynamic current-voltage curves. Product designers use these reports to approve the transistor for the final assembly stage of the transmitter module.
Correct heat-sinking also minimizes the effect because elevated temperatures accelerate the release of the trapped carriers.