Meaning
Electromagnetic standing waves that form inside a metallic housing when its internal dimensions equal multiples of the half-wavelength of an operating frequency can severely disrupt system performance. This enclosure cavity resonance creates localized high-intensity fields that couple unwanted noise into sensitive microstrip lines and high-speed traces. The phenomenon turns a simple metal shield into a resonant chamber, amplifying emissions that would otherwise remain isolated.
Physical Dimension
Low-frequency modules remain unaffected because their housings are too small to support resonant modes at their operating wavelengths. As frequencies climb into the gigahertz spectrum, however, the threshold for enclosure cavity resonance is easily met within compact hand-held devices. The inner dimensions of the shielding metal can must be calculated carefully during the early design phase to ensure the lowest resonant frequency lies well above the system operating range.
Resonant Suppression
Adhering lossy absorber sheets to the interior roof of the metallic cover dampens the unwanted standing waves. This treatment lowers the quality factor of the cavity, preventing the enclosure cavity resonance from amplifying electromagnetic emissions. System testing requires automated frequency sweeps across the full operating range to verify that no resonant peaks remain inside the housing.
Component Placement
Shifting the physical position of noisy oscillators or amplifiers away from the cavity center can also minimize the coupling coefficient.