Meaning
Unwanted radio frequency products generated by the non-linear mixing of two or more signals within a system component or junction. These intermodulation harmonics appear at predictable mathematical combinations of the fundamental input frequencies.
Interference Generation
Signals interacting in an amplifier or a corroded connector produce new frequencies that the system cannot filter out easily. When intermodulation harmonics fall near the intended carrier, they raise the noise floor and decrease sensitivity. These effects are particularly strong in multi radio environments.
Interference can lead to dropped calls or reduced data speeds.
Component Linearity
Selection of filters and mixers reduces the magnitude of the distortion products created during transmission. Strong intermodulation harmonics suggest that a stage in the signal chain is operating too close to its saturation point. Designers use the third order intercept point as a benchmark for performance.
Mitigation Strategy
Physical separation of antennas and the use of circulators prevent external signals from entering the transmitter output stage. Detecting intermodulation harmonics during the design phase allows for frequency planning that avoids sensitive bands. Shielding prevents the leak of these signals between internal boards.
The presence of passive intermodulation is checked at high power junctions to ensure the system noise floor remains stable. Metal contacts must be clean and torqued to specific values to minimize these effects.