Meaning
Microcontroller security architectures separate the memory spaces and execution paths used by interrupt service routines to prevent unauthorized code execution or privilege escalation. By employing interrupt vector isolation, firmware developers ensure that a vulnerability in one handler cannot be used to overwrite adjacent jump addresses. This separation is achieved through hardware-level memory protection units or dedicated vector offset registers.
Memory Architecture
Hardware registers control the base address of the interrupt vector table, allowing the system to point to different vector sets depending on the current execution mode. In a secure application, the interrupt vector isolation is maintained by placing the secure vectors in a read-only region of flash memory while non-secure vectors reside in a separate partition. This configuration prevents malicious software from modifying the pointers and redirection targets.
System Stability
Isolating these vectors protects the core from unpredictable branching when an external event occurs. For example, if an analog-to-digital converter triggers an interrupt, the processor jumps directly to the pre-assigned handler without risk of executing unmapped memory. This predictable flow is necessary for real-time systems where failure to respond to a physical event within microseconds can cause mechanical damage or communication drops.
Validation Protocol
Engineers test the integrity of this defensive boundary by deliberately attempting to write invalid addresses to the vector table during simulation or emulation phases. Static analysis tools verify that the linker scripts place the vectors in protected zones, while dynamic testing injects faults to confirm that illegal access attempts generate a hard fault or reset the chip rather than executing the compromised code. This testing confirms that the boundary holds under malicious attack scenarios, providing the necessary assurance before the device is deployed in industrial environments.