Meaning
Elastoplastic structural components subjected to cyclic loads can exhibit progressive deformation in one direction. This phenomenon, known as kinematic ratcheting, occurs when the plastic strain increments accumulate with each loading cycle under a secondary constant load. It can eventually lead to structural failure or excessive deformation.
Cyclic Loading
Mechanical components in high-temperature environments often experience combinations of thermal and mechanical cycling. In these situations, kinematic ratcheting is triggered when the combined stresses exceed the elastic limit of the material. This behavior is common in heat exchanger tubes and pressure vessels.
Strain Accumulation
Microstructural changes during repeated yielding alter the internal back-stress of the metal matrix. When kinematic ratcheting occurs, the center of the yield surface shifts dynamically, preventing the material from reaching a closed elastic or plastic loop. The material continues to deform until it reaches its ductility limit, which results in localized necking or micro-void coalescing.
Designing components to operate within the shakedown limit avoids this progressive damage mechanism.
Structural Lifetime
Structural life prediction requires detailed analysis of plastic strain growth rates. Modeling kinematic ratcheting is necessary to estimate the number of cycles before failure occurs. This evaluation is part of the design validation process for components operating in high-stress thermal cycles.